Average Reviews:
(More customer reviews)Couldn't be happier with the purchase.
Here are some facts:
1. This unit replaced a Badger-1 disposal which had come with our house when we bought it new in 2004. I didn't even know what type we had until I took it out. We had been happy with the Badger but it eventually stopped working. Doing some research after-the-fact, I learn the Badger-1 only has a 1/3 hp motor and 1 year warranty. The Waste King L-8000 has a full 1 hp motor and a lifetime (non-transferable) warranty.
2. Though the Badger-1 only had 1/3 of the power of the L-8000, the Waste King was actually quieter. We didn't think either of them was loud, but the Waste King was even quieter.
3. There are basically two types of disposal mounts nowadays. If you have an existing disposal, the odds are nearly 100% that it's installed utilizing either a 3-bolt mount system or the EZ mount system. If you are planning to replace a disposal that required a 3-bolt mount system (such as the Badger-1) with a disposal that requires the EZ mount system (such as the Waste King) you will also need to purchase the following adapter kit: Anaheim Mfg Co 3 Bolt Mount Adapter Kit 3101.
* The above adapter kit is sold here on Amazon for less than $10 and is very easy to install. All you do is swap out two pieces that came with your EZ mount disposal with the two pieces in the kit. You will then be able to connect your new EZ mount disposal to a sink that contains 3-bolt mount hardware. On a scale of 1-10, I would say that the difficulty factor was a 1 or 2. Easy! Additionally, Anaheim Mfg Co (the company that makes the adapter kit) is the same company that manufactures Waste King disposals. So, everything fit perfectly and effortlessly.
4. I had never done any plumbing but I was able to do this myself. Total time was around 2 hours... but I took my time and also (as the instructions recommended) took time to disassemble most of the plastic plumbing from underneath the sink and cleaned them out real well. I was surprised how much gunk had accumulated.
5. The instructions list nine items or tools it thinks you might need to get the job done... but you will likely need much less. I only needed two tools myself: a screwdriver and a hacksaw. The screwdriver was used to tighten the three screws of the 3-bolt mount system while the hacksaw was used to slightly shorten a couple plastic pieces (the horizontal sink pipe leading from main sink line to disposal & the discharge elbow coming off the disposal).
6. Another concern I had was whether the different lengths of the Badger disposal versus my Waste King disposal might cause plumbing alignment problems when I tried to put everything back together. It was not an issue. I'm now guessing the actual plumbing location within the different brands of disposals are standard. In other words, if one disposal is 16 inches deep while the other is 20 deep inches deep, both would have plumbing entering the disposal at 9 inches down from the top.
7. I bought this unit after seeing Consumer Reports (Aug 2009 issue) rate it highest out of six disposals they tested. They also showed the price as $230, so seeing it on Amazon for much less and reading all the positive reviews made it a no brainer.
Hope this helps!
Click Here to see more reviews about: Waste King L-8000 Legend Series 1.0-HorsepowerContinuous Feed Operation Waste Disposer
The Waste King Legend 8000 One-Horsepower Disposer showcases an ultra-powerful motor, stainless steel grinding components, superior sound insulation, and a corrosion-proof grinding chamber for efficient, quiet, no-fuss waste disposal. Once installed, this continuous-feed waste disposer will more than earn its place in your kitchen.
Experience a More Powerful GrindFeaturing an energy-efficient, high-speed, 2,800 RPM 'Vortex' permanent magnet motor, the Legend 8000 offers more power per pound than comparative disposers. This one-horsepower motor will grind just about anything, and it requires 115 volts, 60 Hertz, and 7.0 current-amps to operate.
Jam-Free, Mess-Free FeedsThe Legend 8000 is a continuous-feed disposer, which means you can add waste while the unit runs. Stainless steel swivel impellers reduce jamming, and an easily removable
Grinding Components Minimize Noise and WearBecause the Legend 8000's grinding chamber is made of glass-filled nylon, you will never have to worry about corrosion. Also, the stainless steel grinding components are insulated, so you'll get the quietest grind possible.
Easy Installation; Works with Septic TanksThe Waste King Legend 8000 includes a fast-and-easy mount system, with all the necessary hardware for no-hassle installation. The disposer is safe for properly sized septic tanks and comes with a 36-inch power cord.
Lifetime In-Home Service WarrantyThe Waste King Legend 8000 is backed by a limited mechanical warranty. This means that if your disposer develops a material or mechanical defect within the lifetime of the original purchaser, it will be replaced in your home--free of charge. The disposer also comes with a lifetime warranty against corrosion.
What's in the BoxThe Waste King Legend 8000 1.0-Horsepower Disposer, mounting hardware, and power cord.
Get 63% OFF
No comments:
Post a Comment